Wholesale Folding Canopy Tent

The differences between Iron frame and Aluminum frame of trade show tent:

1.Iron frame of outside canopy is cheap and strong, better cost performance, just it may rust after the painting peel off.

2.Aluminum frames of outside tent are strong and never rust, better looking, high grade.

3.The same frame of vendor canopy can be made in different weights to meet different needs.

4.Square tube and hexagonal tube of pop up canopy are both available for Iron frame or Aluminum frame.

5.The commercial tent can be customized in any color if big quantity.

Heat Transfer Dye sublimation printing is the major technology used in our fabric and textile printing.This technology allows us to produce high quality custom fabric prints at cost effective prices and on very short lead times. It is very good for custom feather flags,custom teardrop flags,custom personalized canopy and flag banners.

Regarding printing method, if small quantity or complicated images banners, we print the banner graphic by heat transfer dye sublimation, which is major printing technology used in our fabric and textile printing, this is digital printing way, can print any design with full color.

And if the design of print tent is simple, and big quality, we use CMYK silkscreen printing for canopy printing, can save cost, the price can be much lower.

Each item above is optional as your situation.

1) Kindly please let us know which frame type promotion tent is better for your situation?
2) Which wall/panels of trade canopy do you need? how many pcs? and single side or double for tent printing?
3) Do you need the wheel bag, ground pin and sand bag? ( At normal weather situation, the canopy tent is stable without the pin and sand bag)
4) What’s the shipping address with post code? we will also check the freight for you.

1.Read theinstructions carefully before installing the promotion canopy, to avoid affecting the performance of product because of improper installation.

2.Avoid sharp scratches on the pop up tent, which willaffect the performance of product.

3.After the display tent is used, all spare parts should be collected for reuse.

4.The weight oneach foldable tent frame shall not exceed 100kg when the stack is piled up.

5.Handlewith care when carry the aluminum canopy, and prevent the outer packaging from being damaged, so as not to lose the accessories.

6.If the appliance is used in a folding canopy, please note that the wire and the iron frame should be well insulated, otherwise there is danger of electric shock.

7.Before setting up a outdoor tent, you must carefully survey the terrain. There should be no rolling stones, rolling wood and weathered rocks above the camp.

8.Do not build display canopy near river banks and dry river beds during the rainy season.

9.For lightning protection, do not build the event canopy on the top of the mountain or in the open field.

10.When installing the outdoor canopy on mud or sand, you can dig the drainage ditch around to ensure the dryness of the ground inside the retractable canopy.

11.The fabric used for the print canopy are not flame retardant. If you need to cook in the ez up canopy, be sure to keep the flame away from the custom tent cloth or use a fireproof board to isolate the flame. You should not leave the trade show canopy, usually prepare the fire extinguishing and install the exhaust fan to remove oil fume.

12.If weather forecastsaid the local wind will exceed level 8 or above, please take back the foldable canopy in advance.

13.Before storing the ez up tent, be sure to dry the trade tent cloth, and then fold it back and store it. If it is too late to dry the vendor tent cloth, remember that it must not be stored for a long time to avoid coloring or mildew.

14.Depending on the local humidity and climate, dry the retractable tent cloth regularly to avoid bacterial growth or damage the aluminum tent’s rain-proof coating.